You are here: Home>>News>>Riveting Machine News

Can I Try an Automatic Riveting Machine for Free? CHANRUI On-Site Trial Policy and Workflow - CHANRUI

Published: 2025-11-06 15:37:01 Views: 911 views Author: admin

Can I try an automatic riveting machine for free? CHANRUI on-site trial policy and steps explained

Yes, but CHANRUI favors an "on-site trial" instead of leaving the equipment with the customer for long-term self-trial. An automatic riveting machine is non-standard equipment configured to the rivet specification, and the nozzle, channel and pulling force must all match the specific rivet; without an engineer's on-site commissioning, customer self-trial often fails to show real results and may even cause misjudgment from wrong parameters. Thus the standard approach is for an engineer to bring a matched model on site and sample with the customer's real rivets and workpieces.

I. On-site trial policy

Item	Note
Is there a charge	Routine on-site trials are free; any fee for special non-standard solutions is explained beforehand
Coverage area	Every manufacturing region nationwide
Reply time	We contact to confirm within 1 business day of receiving the booking
Trial scope	On-site measurement of continuous feed, cycle, pulling force and riveting yield
Linked to purchase	Not linked; trial data is for the customer's decision reference

II. The full process

Step one: send your specs.Provide rivet head diameter, shank diameter, length and material, workpiece drawings or photos, material and plate thickness, daily output and cycle requirements, which can be sent by phone, form or WeChat; CHANRUI gives a solution and price range in about 10 minutes.

Step two: shortlist the model.The engineer determines the main unit, gun type, nozzle and feeding method according to the specs, clarifying a standard or non-standard solution.

Step three: book the on-site visit.After a time is agreed, the engineer brings the matched model and inspection tools to the factory.

Step four: sample on site.Rivet continuously with real rivets and workpieces, recording per-rivet cycle, per-piece work time, pull-out force and yield, and demonstrating changeover and daily operation.

Step five: issue the formal solution.Confirm the model, configuration, quotation, lead time and training arrangements against the measured data, then decide whether to purchase.

Tabletop automatic riveting machine on-site sampling

Photo: tabletop automatic riveting machine, able to sample and verify on site at a fixed station

III. What customers prepare before the trial

Just prepare three things: (1) rivet samples (enough quantity of each specification); (2) the workpieces to be riveted (including typical parts of different plate thicknesses); (3) the current manual cycle and daily output requirements. If you have a station layout drawing, air pump parameters and planned placement, provide them too, and the engineer will also give fixture and line layout recommendations.

IV. What if you are out of town or temporarily unable to host an on-site visit

Customers temporarily unable to host an on-site visit can first send rivet samples and typical workpieces to the factory, where CHANRUI completes sampling in the workshop, records video and provides measured data; you can also bring workpieces to the manufacturing base to view the machine on site. After solution confirmation, door-to-door delivery, installation/commissioning and operation training are likewise supported. For the detailed process seeFree On-Site Trial Process and Preparation。

V. What a complete trial record includes

A proper on-site trial should not be merely "drive a few rivets and see"; we recommend asking the engineer to form a retainable data record on site:

Record Field	Content
Trial setup	Date, location, rivet specification, workpiece name, model and configuration
Continuous feed	Trial count, jam/empty-nail times, nail-feeding success rate
Timing data	Average per-rivet time, per-piece work time (including pick-and-place and repositioning)
Quality results	Pull-out force sample values, thread stripping/missed rivet/scratch status, yield
Conclusion & recommendation	Recommended model, price range, estimated payback period

CHANRUI on-site trials are recorded and fed back to the customer on the above basis, which the customer can use to compare horizontally with other suppliers and as a basis for internal project approval and procurement sign-off.

How the trial connects to formal purchase: once the trial record is confirmed, the engineer issues the formal solution and quotation accordingly; standard machines can be arranged for stock shipment and non-standard machines enter design scheduling; the quotation states a validity period, and the customer signs only after completing internal approval. The trial charges no fee, does not consume the quotation validity period, and requires no deposit.

Trial FAQ

Q1: How long does a trial usually require?

A single specification and single station usually takes 1-2 hours to complete continuous sampling and data recording; multiple specifications, multiple workpieces or a single-vs-dual-gun comparison extend the time accordingly, which is communicated in advance when booking.

Q2: Can I test multiple rivets?

Yes, it is recommended to prepare both in-use and planned specifications to verify compatibility and changeover time on site, so the configuration can be fixed at one go.

Q3: How long after a passed trial until delivery?

Standard models can ship quickly from stock; non-standard models are scheduled per the design and assembly cycle, with the exact lead time written into the contract; seeHow Long to Customize an Automatic Riveting Machine。

Q4: Can an engineer run trials separately for multiple workshops?

Yes. If the site has multiple products and rivet specifications, state this at booking and the engineer will bring adapted nozzles, plan the time, verify workshop by workshop and, if needed, arrange multiple visits.